Age and Stage

Are Wooden Toys Safer Than Plastic? Paint, Finishes, BPA and Small Parts

Wood is not automatically safer than plastic. What CPSC, FDA and the AAP say about toy paint, lead, phthalates, BPA and small parts.

6 min read

Are wooden toys safe for babies? Neither material wins automatically. The CPSC, AAP and FDA pages that apply here rank no material above another, so "wood" or "plastic" on the box tells you less than how a particular toy is made, labeled and sized.

That shifts the job. Instead of picking a side, you check a short list of things that apply to both materials, plus a few that apply to one.

Are Wooden Toys Safe for Babies? The Short Answer

The rules that matter most are written for children’s products, not for one material. CPSC says the CPSIA made ASTM F963 a mandatory consumer product safety standard for children’s toys. Manufacturers and importers must certify that those toys meet the standard by issuing a Children’s Product Certificate.

That applies to a wooden toy and a plastic toy alike.

CPSC also lists a mandatory lead requirement for accessible substrates of children’s products (15 U.S.C. 1278a), a lead-in-paint rule, and a ban on small parts in certain children’s products. Of the CPSC rules on this page, only the phthalate limit is aimed at a kind of component: plasticized parts. We’ll get to it below.

So the useful questions are practical ones. Is the toy labeled for your child’s age? Does the label say "nontoxic"? Is any part small enough to fit in a mouth? Is the toy sturdy, and has it been recalled?

If you are setting up a Montessori yes space with open shelves at floor level, those same questions apply to every item on the shelf.

Are Painted Wooden Toys Safe for Babies? Lead and Paint Rules

Paint is where CPSC’s lead-in-paint rule applies.

CPSC’s toy guidance says a mandatory requirement prohibits excessive levels of lead in paints and similar surface coatings in children’s products (16 C.F.R. part 1303). CPSC’s lead-in-paint guidance goes further. It says children’s products and furniture articles that use paints or similar surface-coating materials containing 0.009% or more lead by weight are banned hazardous products.

The rule is about the coating. It covers paint on a wooden toy the same way it covers paint on a plastic toy, a metal toy or a piece of furniture.

A separate CPSC requirement prohibits excessive levels of lead in accessible substrates of children’s products (15 U.S.C. 1278a). CPSC’s toy guidance does not single out wood or plastic there either.

Picture this: a relative hands you a hand-painted wooden stacking set. There is no box, no tag and no age label. You cannot tell from the toy itself whether its paint meets the lead rule. The AAP’s advice is to make sure the label says "nontoxic" and to read the warning labels for age information. A toy with no label gives you neither.

No finish, oil or wax is named as safe in the guidance from CPSC or the AAP. What you can say is narrower: the lead ban applies to paint, and the AAP wants a "nontoxic" label.

Brightly painted wooden stacking toys on a wooden base: rings, hexagons and blocks in red, blue, yellow and green
A row of six small soft plastic bath ducks in pastel pink, orange, yellow, green and lilac on a white background

Are Plastic Toys Toxic for Babies? Phthalate Limits and the BPA Page

No CPSC, FDA or AAP page cited here calls plastic toys toxic. What they have are rules about specific chemicals in specific uses.

Phthalates. CPSC says Section 108 of the CPSIA prohibits children’s toys and child care articles that contain more than 0.1% (1000 ppm) of eight named phthalates in an accessible plasticized component. The eight are DEHP, DBP, BBP, DINP, DIBP, DPENP, DHEXP and DCHP. For this rule, CPSC defines a children’s toy as a product designed or intended by the manufacturer for a child 12 years of age or younger.

This is a limit on certain chemicals in plasticized parts. It is not a ban on plastic.

BPA. The FDA page on BPA concerns food contact, not toys. FDA says it amended its regulations to no longer provide for the use of BPA-based polycarbonate resins in baby bottles and sippy cups (2012). It did the same for BPA-based epoxy resins as coatings in packaging for infant formula (2013).

FDA says it took both actions because petitions showed those uses had been abandoned. It did not frame them as safety removals.

FDA’s current view is that BPA is safe at the current levels occurring in foods. That statement is about food and packaging. It is not a ruling on a rattle or a stacking ring, and it should not be stretched to cover one.

Parents weighing non-toxic baby-proofing materials across the whole house run into the same limit: a rule or label covers a defined thing, and the claim stops there.

Small Parts Are a Risk in Every Material

A wooden bead and a plastic bead are the same size problem. Material does not change whether a piece fits in a mouth.

CPSC says a mandatory requirement banning small parts in certain children’s products already exists at 16 C.F.R. part 1501. The AAP gives parents a simple tip: make sure all toys and parts are larger than your child’s mouth, to prevent choking.

That advice covers the toy and every part of it. Wood or plastic, you are checking parts, not materials.

Sorting toys by age for small parts is easiest when you do it as toys arrive, rather than after a mixed bin builds up. The label’s age grade tells you which pile a toy belongs in.

The AAP also says warning labels give important information about how to use a toy and what ages the toy is safe for. Read them.

Sturdy Plastic, Recalls and Hand-Me-Downs

Durability belongs in the plastic conversation. The AAP says to buy plastic toys that are sturdy, because toys made from thin plastic may break easily into sharp pieces.

Picture this: a plastic toy has been dropped, chewed and stepped on for months. Now there is a crack along one edge. The AAP’s note about thin plastic breaking into sharp pieces is the reason to look hard at a toy like that and decide whether it stays in the play area.

Recalls apply to both materials. The AAP says toys are recalled for various reasons, including unsafe lead levels, and that recalled toys should be removed right away.

Picture this: a box of hand-me-down toys arrives with the packaging long gone. You cannot tell which have been recalled or what age they were made for. That is a good moment to look up the toy’s name and maker before it goes into the play area.

If you think your child has been exposed to a toy containing lead, the AAP says to ask your child’s doctor about testing for elevated blood lead levels. For more on this, the AAP’s HealthyChildren.org is the place to start.

Picking toys for babies by age also helps with gifts and hand-me-downs, as long as the toy still has its warning label to read.

A Buyer Checklist for Any Toy

Use this list for wood, plastic or a mix of both.

  • Look for "nontoxic" on the label. The AAP says to avoid toys with toxic materials that could cause poisoning.
  • Read the age and warning labels. The AAP says they give important information on use and ages.
  • Choose sturdy plastic. The AAP says thin plastic may break into sharp pieces.
  • Check that every toy and part is larger than your child’s mouth. This is the AAP’s choking advice.
  • Remove recalled toys right away. The AAP lists unsafe lead levels among the reasons for recalls.
  • Treat paint as a coating covered by a lead ban. CPSC bans children’s products with paint or surface coatings at 0.009% or more lead by weight.

Here is how each rule and check lines up against the two materials.

CheckSourceWhat it saysApplies to
Toy standard CPSC ASTM F963 plus certificate Both
Lead in accessible substrates CPSC Excessive lead prohibited Both
Lead in paint and coatings CPSC Banned at 0.009% or more lead by weight Both, if painted
Phthalates CPSC Eight named phthalates prohibited at more than 0.1% (1000 ppm) Plastic, plasticized parts
Small parts CPSC, AAP Small-parts ban; parts larger than mouth Both
“Nontoxic” label AAP Label says nontoxic Both
Age and warning labels AAP Important use and age information Both
Sturdiness AAP Thin plastic may break Plastic
Recalls AAP Remove recalled toys right away Both

Where to Start

Skip the wood-versus-plastic debate and pick up the toy in front of you. Read the label for "nontoxic" and the age grade, check that no part is smaller than your child’s mouth, and look at whether the plastic is sturdy or thin. Then look up the toy’s name against recall notices before it joins the rotation.

Common Questions

Do wooden toys have to meet the same standard as plastic toys?
CPSC says ASTM F963 is a mandatory standard for children’s toys. Makers and importers certify with a Children’s Product Certificate. It is written for children’s toys, so it covers wooden and plastic ones alike.
Does the FDA’s BPA page cover toys?
No. It concerns food contact, including baby bottles, sippy cups and infant formula packaging, where FDA says the BPA uses had been abandoned. FDA’s current view is that BPA is safe at the current levels occurring in foods.
Does a “nontoxic” label settle the question?
The AAP says to make sure the label says “nontoxic.” It is one check, beside the AAP’s advice on age labels, sturdiness and parts larger than your child’s mouth.
What if I think my child was exposed to lead from a toy?
The AAP says to ask your child’s doctor about testing for elevated blood lead levels. The AAP also says recalled toys, including those recalled for unsafe lead levels, should be removed right away.